Skip to content

Humboldt Fire and EMS Frequencies

Humboldt in Gibson County, Tennessee has 2 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Trenton Armory (Tennessee Advanced Communications Network (TACN)), about 8 miles away.

Humboldt also extends into Madison County.

About Humboldt Fire and EMS Frequencies

Quick answer: Fire dispatch for Humboldt: Humboldt Fire 154.1300 MHz, narrow FM, 245 DPL. EMS dispatch for Humboldt: Humboldt EMS 155.2200 MHz, narrow FM, 233.6 PL.

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Humboldt conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Humboldt
AgencyDescriptionFrequency (MHz)ToneModeFCC
Humboldt FireHumboldt Fire – Dispatch154.1300
In 151.0550
245 DPLFMNWNKG204

EMS Dispatch

EMS Dispatch frequencies for Humboldt
AgencyDescriptionFrequency (MHz)ToneModeFCC
Humboldt EMSRescue Squad155.2200233.6 PLFMNWPCD819

Gibson County channels that also cover Humboldt

Fire Dispatch

Fire Dispatch frequencies for Gibson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gibson County FireGibson County Fire – Dispatch154.2050FMNWRPE351
Gibson County FireGibson County Fire – Dispatch159.1350
In 153.8900
156.7 PLFMNWNQW781
Moores Chapel FireMoores Chapel Fire – Dispatch154.0250
In 151.1975
123.0 PLFMNWQKG308
Moores Chapel FireMoores Chapel Fire – Dispatch453.3375
In 458.3375
FMNWQKG308

EMS Dispatch

EMS Dispatch frequencies for Gibson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gibson County EMSGibson County EMS – Dispatch154.8750
In 159.0300
69.3 PLFMNKNFS540
Gibson County EMSGibson County EMS – Alternate155.2350156.7 PLFMNKNFS540
Medlink EMSMedlink EMS – ALS Dispatch Trenton152.3525
In 157.6125
CC 1 · TG 105 · SL 1DMRWQSV645

Nearest trunked radio sites

Distances are measured from the center of Humboldt.

Trenton Armory · Tennessee Advanced Communications Network (TACN)
RFSS 4 · Site 21 (hex 15) · NAC 2A6 · about 8 mi away
Control 769.33125, 769.85625
Voice 769.58125, 770.20625, 772.40625, 773.78125
Jackson Simulcast · Jackson Public Safety (P25)
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC 8B1 · about 15 mi away
Control 857.2625, 858.2625, 859.2625, 860.2625
Voice 856.2625, 856.7625, 857.7625, 858.7625, 859.7625, 860.7625
Jackson Shop · Tennessee Advanced Communications Network (TACN)
RFSS 4 · Site 20 (hex 14) · NAC 2A2 · about 16 mi away
Control 769.08125, 769.75625, 770.03125
Voice 769.43125, 770.53125, 770.93125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Humboldt?

Fire dispatch channels listed for Humboldt: Humboldt Fire 154.1300 MHz, narrow FM, 245 DPL.

What frequency does EMS or the ambulance service use in Humboldt?

EMS dispatch channels listed for Humboldt: Humboldt EMS 155.2200 MHz, narrow FM, 233.6 PL.

What scanner do I need to listen to fire and EMS in Humboldt?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Humboldt?

For Humboldt, start with the Trenton Armory site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.33125, 769.85625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Humboldt fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Humboldt are marked encrypted.