About Bells Fire and EMS Frequencies
Quick answer: Fire dispatch for Bells: Bells Fire 154.0850 MHz, narrow FM, 123.0 PL. County-level ems dispatch that covers Bells: Crockett County EMS 155.5350 MHz, narrow FM, 206.5 PL.
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (NXDN96), which needs a scanner that decodes that mode.
- 1 entry is marked expired, so it may no longer be in use.
Data updated .
Bells conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bells Fire | Bells Fire – Dispatch | 154.0850 | 123.0 PL | FMN | KNCR244 |
Crockett County channels that also cover Bells
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Crockett County Fire | Crockett County Fire – Fire Ground | 154.1000 | 88.5 PL | FMN | WNBM982 |
| Crockett County Fire | Crockett County Fire – Dispatch | 155.0700 In 159.3525 | 141.3 PL | FMN | WQQG274 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Crockett County Fire Expired: Expired 1/01 | Rescue Squad (in use??) | 155.1600 | 88.5 PL | FMN | WNVI658 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Crockett County EMS | Crockett County EMS – Dispatch | 155.5350 In 154.6500 | 206.5 PL | FMN | KVA412 |
| Crockett County EMS | Crockett County EMS – Dispatch | 155.5350 In 154.6500 | RAN 7 | NXDN96 | KVA412 |
Nearest trunked radio sites
Distances are measured from the center of Bells.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Bells?
Fire dispatch channels listed for Bells: Bells Fire 154.0850 MHz, narrow FM, 123.0 PL.
What frequency does EMS or the ambulance service use in Bells?
We do not have a EMS dispatch channel listed specifically for Bells. The county-level EMS dispatch channels in the same county: Crockett County EMS 155.5350 MHz, narrow FM, 206.5 PL.
What scanner do I need to listen to fire and EMS in Bells?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN96 is needed for the digital conventional channels.
What are the control channels for trunked radio in Bells?
For Bells, start with the Brownsville site of Tennessee Advanced Communications Network (TACN). Its control channels are 851.0625, 851.275, 851.4375, 851.65 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Bells fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Bells are marked encrypted.