About Sewanee Fire and EMS Frequencies
Quick answer: Fire dispatch for Sewanee: Sewanee Fire 453.1250 MHz, narrow FM, 97.4 PL. County-level ems dispatch that covers Sewanee: Franklin County EMS 155.1150 MHz, narrow FM, 107.2 PL. Trunked: Tennessee Advanced Communications Network (TACN), for example TN-RMCC Region 3 talkgroup 49644 (hex c1ec).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Tennessee Advanced Communications Network (TACN): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Sewanee, start with the Orme site of Tennessee Advanced Communications Network (TACN), about 12 miles away. Its control channels: 769.08125 MHz.
Data updated .
Sewanee conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sewanee Fire | Volunteer Fire | 453.1250 In 458.1250 | 97.4 PL | FMN | WPKJ224 |
Sewanee trunked talkgroups
Tennessee Advanced Communications Network (TACN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| TN-RMCC Region 3 | EMS Encode – Sewanee (Franklin Co.) | 49644 | c1ec | T |
Franklin County channels that also cover Sewanee
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Franklin County Fire | Franklin County Fire – Dispatch – Countywide | 155.7300 In 153.7550 | 118.8 PL | FMN | WPCS751 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Franklin County EMS | Franklin County EMS – Dispatch – Countywide | 155.1150 In 154.8000 | 107.2 PL | FMN | WPXF920 |
Nearest trunked radio sites
Distances are measured from the center of Sewanee.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Sewanee?
Fire dispatch channels listed for Sewanee: Sewanee Fire 453.1250 MHz, narrow FM, 97.4 PL.
What frequency does EMS or the ambulance service use in Sewanee?
We do not have a EMS dispatch channel listed specifically for Sewanee. The county-level EMS dispatch channels in the same county: Franklin County EMS 155.1150 MHz, narrow FM, 107.2 PL.
Do fire departments and EMS use a trunked radio system in Sewanee?
Yes. Fire and EMS talkgroups are listed for Tennessee Advanced Communications Network (TACN): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Sewanee?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Sewanee?
For Sewanee, start with the Orme site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.08125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Sewanee fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Sewanee are marked encrypted.
Are Sewanee fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Sewanee are marked encrypted.