Skip to content

Winchester Fire and EMS Frequencies

Winchester in Franklin County, Tennessee has 1 conventional frequency and 1 trunked talkgroup listed for local fire and EMS agencies. The closest trunked radio site we have is Winchester VHF (*) (Tennessee Advanced Communications Network (TACN)), about 7 miles away.

About Winchester Fire and EMS Frequencies

Quick answer: Fire dispatch for Winchester: Winchester Fire 155.8050 MHz, narrow FM, 043 DPL. County-level ems dispatch that covers Winchester: Franklin County EMS 155.1150 MHz, narrow FM, 107.2 PL. Trunked: Tennessee Advanced Communications Network (TACN), for example TN-RMCC Region 3 talkgroup 49645 (hex c1ed).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Tennessee Advanced Communications Network (TACN): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Winchester, start with the Winchester VHF (*) site of Tennessee Advanced Communications Network (TACN), about 7 miles away. Its control channels: 152.085, 152.775 MHz.

Data updated .

Winchester conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Winchester
AgencyDescriptionFrequency (MHz)ToneModeFCC
Winchester FireWinchester/Decherd Fire/Rescue155.8050
In 153.8000
043 DPLFMNWQAB510

Winchester trunked talkgroups

Tennessee Advanced Communications Network (TACN)

Tennessee Advanced Communications Network (TACN) talkgroups
AgencyDescriptionTalkgroupHexMode
TN-RMCC Region 3EMS Encode – Winchester (Franklin Co.)49645c1edT

Franklin County channels that also cover Winchester

Fire Dispatch

Fire Dispatch frequencies for Franklin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Franklin County FireFranklin County Fire – Dispatch – Countywide155.7300
In 153.7550
118.8 PLFMNWPCS751

EMS Dispatch

EMS Dispatch frequencies for Franklin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Franklin County EMSFranklin County EMS – Dispatch – Countywide155.1150
In 154.8000
107.2 PLFMNWPXF920

Nearest trunked radio sites

Distances are measured from the center of Winchester.

Winchester VHF (*) · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 34 (hex 22) · about 7 mi away
Control 152.085, 152.775
Voice 152.535
Winchester 800 · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 70 (hex 46) · about 7 mi away
Control 854.8875
Voice 855.3875, 855.7375, 856.05, 856.5125, 857.075
Arnold AFB · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 75 (hex 4B) · NAC 2A0 · about 12 mi away
Control 769.60625
Voice 771.13125, 772.80625, 773.24375, 774.38125, 774.88125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Winchester?

Fire dispatch channels listed for Winchester: Winchester Fire 155.8050 MHz, narrow FM, 043 DPL.

What frequency does EMS or the ambulance service use in Winchester?

We do not have a EMS dispatch channel listed specifically for Winchester. The county-level EMS dispatch channels in the same county: Franklin County EMS 155.1150 MHz, narrow FM, 107.2 PL.

Do fire departments and EMS use a trunked radio system in Winchester?

Yes. Fire and EMS talkgroups are listed for Tennessee Advanced Communications Network (TACN): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Winchester?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Winchester?

For Winchester, start with the Winchester VHF (*) site of Tennessee Advanced Communications Network (TACN). Its control channels are 152.085, 152.775 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Winchester fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Winchester are marked encrypted.

Are Winchester fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Winchester are marked encrypted.