Skip to content

Belvidere Fire and EMS Frequencies

We do not have frequencies listed specifically for Belvidere in Franklin County, Tennessee yet. Countywide channels for Franklin County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Winchester VHF (*) (Tennessee Advanced Communications Network (TACN)), about 4 miles away.

About Belvidere Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Belvidere: Franklin County Fire 155.7300 MHz, narrow FM, 118.8 PL. County-level ems dispatch that covers Belvidere: Franklin County EMS 155.1150 MHz, narrow FM, 107.2 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Franklin County channels that also cover Belvidere

Fire Dispatch

Fire Dispatch frequencies for Franklin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Franklin County FireFranklin County Fire – Dispatch – Countywide155.7300
In 153.7550
118.8 PLFMNWPCS751

EMS Dispatch

EMS Dispatch frequencies for Franklin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Franklin County EMSFranklin County EMS – Dispatch – Countywide155.1150
In 154.8000
107.2 PLFMNWPXF920

Nearest trunked radio sites

Distances are measured from the center of Belvidere.

Winchester VHF (*) · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 34 (hex 22) · about 4 mi away
Control 152.085, 152.775
Voice 152.535
Winchester 800 · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 70 (hex 46) · about 4 mi away
Control 854.8875
Voice 855.3875, 855.7375, 856.05, 856.5125, 857.075
Lynchburg - Old No. 7 · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 77 (hex 4D) · NAC 2A5 · about 14 mi away
Control 852.9625
Voice 851.475, 851.6625, 852.175, 852.3625, 852.675
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Belvidere?

We do not have a fire dispatch channel listed specifically for Belvidere. The county-level fire dispatch channels in the same county: Franklin County Fire 155.7300 MHz, narrow FM, 118.8 PL.

What frequency does EMS or the ambulance service use in Belvidere?

We do not have a EMS dispatch channel listed specifically for Belvidere. The county-level EMS dispatch channels in the same county: Franklin County EMS 155.1150 MHz, narrow FM, 107.2 PL.

What scanner do I need to listen to fire and EMS in Belvidere?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Belvidere?

For Belvidere, start with the Winchester VHF (*) site of Tennessee Advanced Communications Network (TACN). Its control channels are 152.085, 152.775 MHz. Program a control channel first; the scanner finds the voice channels from it.