Skip to content

Franklin County Fire and EMS Frequencies

Franklin County in Tennessee has 2 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 9 cities and communities below for local fire departments and EMS agencies.

About Franklin County Fire and EMS Frequencies

Quick answer: Fire dispatch for Franklin County: Franklin County Fire 155.7300 MHz, narrow FM, 118.8 PL. EMS dispatch for Franklin County: Franklin County EMS 155.1150 MHz, narrow FM, 107.2 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Franklin County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Franklin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Franklin County FireFranklin County Fire – Dispatch – Countywide155.7300
In 153.7550
118.8 PLFMNWPCS751

EMS Dispatch

EMS Dispatch frequencies for Franklin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Franklin County EMSFranklin County EMS – Dispatch – Countywide155.1150
In 154.8000
107.2 PLFMNWPXF920

Radio system sites in Franklin County

Program the control channel first; your scanner finds the voice channels from it.

Winchester VHF (*) · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 34 (hex 22)
Control 152.085, 152.775
Voice 152.535
Winchester 800 · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 70 (hex 46)
Control 854.8875
Voice 855.3875, 855.7375, 856.05, 856.5125, 857.075
Arnold AFB · Tennessee Advanced Communications Network (TACN)
RFSS 1 · Site 75 (hex 4B) · NAC 2A0
Control 769.60625
Voice 771.13125, 772.80625, 773.24375, 774.38125, 774.88125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Franklin County

Common questions

What frequency does the fire department use in Franklin County?

Fire dispatch channels listed for Franklin County: Franklin County Fire 155.7300 MHz, narrow FM, 118.8 PL.

What frequency does EMS or the ambulance service use in Franklin County?

EMS dispatch channels listed for Franklin County: Franklin County EMS 155.1150 MHz, narrow FM, 107.2 PL.

What scanner do I need to listen to fire and EMS in Franklin County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Franklin County?

For Franklin County, start with the Winchester VHF (*) site of Tennessee Advanced Communications Network (TACN). Its control channels are 152.085, 152.775 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Franklin County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Franklin County are marked encrypted.