About Lobelville Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Lobelville: Perry County Fire 154.8075 MHz, narrow FM, 315 DPL. County-level ems dispatch that covers Lobelville: Perry County EMS 155.5275 MHz, narrow FM, 331 DPL.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Perry County channels that also cover Lobelville
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Perry County Fire | Perry County Fire – Dispatch (Countywide*) | 154.8075 In 156.2325 | 315 DPL | FMN | WQFG941 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Perry County EMS | Perry County EMS – Dispatch (Countywide) | 155.5275 In 159.0675 | 331 DPL | FMN | WQFG941 |
Nearest trunked radio sites
Distances are measured from the center of Lobelville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Lobelville?
We do not have a fire dispatch channel listed specifically for Lobelville. The county-level fire dispatch channels in the same county: Perry County Fire 154.8075 MHz, narrow FM, 315 DPL.
What frequency does EMS or the ambulance service use in Lobelville?
We do not have a EMS dispatch channel listed specifically for Lobelville. The county-level EMS dispatch channels in the same county: Perry County EMS 155.5275 MHz, narrow FM, 331 DPL.
What scanner do I need to listen to fire and EMS in Lobelville?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Lobelville?
For Lobelville, start with the Lobelville site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.10625, 770.80625, 773.03125, 774.28125 MHz. Program a control channel first; the scanner finds the voice channels from it.