About Butte Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Butte: Silver Bow County Fire 154.4300 MHz, narrow FM, CSQ. EMS dispatch for Butte: Butte EMS 155.2800 MHz, narrow FM, CSQ. Trunked: Montana Public Safety Communications System, for example Silver Bow County/Butte City talkgroup 10403 (hex 28a3).
- 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Montana Public Safety Communications System: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Butte, start with the Butte EOC site of Montana Public Safety Communications System, about 1 miles away. Its control channels: 851.1, 851.275 MHz.
Data updated .
Butte conventional frequencies
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Butte EMS | Butte EMS – Dispatch | 155.2800 | CSQ | FMN | KNCG430 |
| Butte EMS | Butte EMS – Dispatch | 155.3850 | FMN | KNCG430 |
Butte trunked talkgroups
Montana Public Safety Communications System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Silver Bow County/Butte City | Butte/Silver Bow Fire/EMS | 10403 | 28a3 | D |
| Silver Bow County/Butte City | Butte/Silver Bow Fire Tactical | 10405 | 28a5 | D |
Silver Bow County channels that also cover Butte
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Silver Bow County Fire | Silver Bow County Fire – Dispatch | 154.4300 In 153.8900 | CSQ | FMN | KOG993 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Silver Bow County Fire | Command Post | 150.7750 | FMN | KOG993 | |
| Silver Bow County Fire | Command Post | 150.8050 | FMN | KOG993 | |
| Silver Bow County Fire | Silver Bow County Fire – Fire Ground | 154.1300 | FMN | KOG993 | |
| Silver Bow County Fire | Silver Bow County Fire – Fire Ground | 156.0000 | FMN | KOG993 | |
| Silver Bow County Fire | Silver Bow County Fire – Fire Ground | 156.0150 | FMN | KOG993 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Silver Bow County Hospital | Silver Bow County Hospital – Ambulance-to-Hospital | 155.3400 | FMN | KNCG430 |
Nearest trunked radio sites
Distances are measured from the center of Butte.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Butte?
We do not have a fire dispatch channel listed specifically for Butte. The county-level fire dispatch channels in the same county: Silver Bow County Fire 154.4300 MHz, narrow FM, CSQ.
What frequency does EMS or the ambulance service use in Butte?
EMS dispatch channels listed for Butte: Butte EMS 155.2800 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Butte?
Yes. Fire and EMS talkgroups are listed for Montana Public Safety Communications System: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Butte?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Butte?
For Butte, start with the Butte EOC site of Montana Public Safety Communications System. Its control channels are 851.1, 851.275 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Butte fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Butte are marked encrypted.
Are Butte fire and EMS talkgroups encrypted?
None of the 2 talkgroups listed for Butte are marked encrypted.