Skip to content

Whitehall Fire and EMS Frequencies

We do not have frequencies listed specifically for Whitehall in Jefferson County, Montana yet. Countywide channels for Jefferson County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Whitehall (Montana Public Safety Communications System), about 5 miles away.

About Whitehall Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Whitehall: Jefferson County Fire 155.5950 MHz, narrow FM, no tone.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Jefferson County channels that also cover Whitehall

Fire Dispatch

Fire Dispatch frequencies for Jefferson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jefferson County FireJefferson County Fire – County Dispatch155.5950
In 153.8450
FMNWPWC864

Nearest trunked radio sites

Distances are measured from the center of Whitehall.

Whitehall · Montana Public Safety Communications System
RFSS 1 · Site 34 (hex 22) · NAC 160 · about 5 mi away
Control 153.845, 154.905
Voice 154.725, 154.8, 161.9375
Red Mountain · Montana Public Safety Communications System
RFSS 1 · Site 11 (hex B) · NAC 160 · about 20 mi away
Control 161.6, 161.825
Voice 161.79, 170.85
Butte EOC · Montana Public Safety Communications System
RFSS 1 · Site 52 (hex 34) · NAC 162 · about 21 mi away
Control 851.1, 851.275
Voice 851.5375, 853.8875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Whitehall?

We do not have a fire dispatch channel listed specifically for Whitehall. The county-level fire dispatch channels in the same county: Jefferson County Fire 155.5950 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Whitehall?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Whitehall?

For Whitehall, start with the Whitehall site of Montana Public Safety Communications System. Its control channels are 153.845, 154.905 MHz. Program a control channel first; the scanner finds the voice channels from it.