Skip to content

Walkerville Fire and EMS Frequencies

We do not have frequencies listed specifically for Walkerville in Silver Bow County, Montana yet. Countywide channels for Silver Bow County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Butte Uptown (Montana Public Safety Communications System), about 1 miles away.

About Walkerville Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Walkerville: Silver Bow County Fire 154.4300 MHz, narrow FM, CSQ.

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Silver Bow County channels that also cover Walkerville

Fire Dispatch

Fire Dispatch frequencies for Silver Bow County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Silver Bow County FireSilver Bow County Fire – Dispatch154.4300
In 153.8900
CSQFMNKOG993

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Silver Bow County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Silver Bow County FireCommand Post150.7750FMNKOG993
Silver Bow County FireCommand Post150.8050FMNKOG993
Silver Bow County FireSilver Bow County Fire – Fire Ground154.1300FMNKOG993
Silver Bow County FireSilver Bow County Fire – Fire Ground156.0000FMNKOG993
Silver Bow County FireSilver Bow County Fire – Fire Ground156.0150FMNKOG993

Hospitals & Medical

Hospitals & Medical frequencies for Silver Bow County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Silver Bow County HospitalSilver Bow County Hospital – Ambulance-to-Hospital155.3400FMNKNCG430

Nearest trunked radio sites

Distances are measured from the center of Walkerville.

Butte Uptown · Montana Public Safety Communications System
RFSS 1 · Site 51 (hex 33) · NAC 160 · about 1 mi away
Control 851.35, 851.625
Voice 853.6375, 853.8125
Butte EOC · Montana Public Safety Communications System
RFSS 1 · Site 52 (hex 34) · NAC 162 · about 5 mi away
Control 851.1, 851.275
Voice 851.5375, 853.8875
Red Mountain · Montana Public Safety Communications System
RFSS 1 · Site 11 (hex B) · NAC 160 · about 18 mi away
Control 161.6, 161.825
Voice 161.79, 170.85
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Walkerville?

We do not have a fire dispatch channel listed specifically for Walkerville. The county-level fire dispatch channels in the same county: Silver Bow County Fire 154.4300 MHz, narrow FM, CSQ.

What scanner do I need to listen to fire and EMS in Walkerville?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Walkerville?

For Walkerville, start with the Butte Uptown site of Montana Public Safety Communications System. Its control channels are 851.35, 851.625 MHz. Program a control channel first; the scanner finds the voice channels from it.