About Yellowstone County Fire and EMS Frequencies
Quick answer: Fire dispatch for Yellowstone County: Yellowstone County Fire 155.8800 MHz, narrow FM, 114.8 PL. EMS dispatch for Yellowstone County: Yellowstone County EMS 155.2875 MHz, narrow FM, 127.3 PL. Trunked: Montana Public Safety Communications System, for example Yellowstone County Fire talkgroup 12452 (hex 30a4).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Montana Public Safety Communications System: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Yellowstone County, start with the Pompey Pillar site of Montana Public Safety Communications System. Its control channels: 151.145, 151.2875 MHz.
Data updated .
Yellowstone County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Yellowstone County Fire | Yellowstone County Fire – Dispatch /DES | 155.8800 In 158.8650 | 114.8 PL | FMN | WPZJ876 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Yellowstone County EMS | AMR Dispatch / Careflight | 155.2875 In 150.7750 | 127.3 PL | FMN | KJW538 |
Yellowstone County trunked talkgroups
Montana Public Safety Communications System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Yellowstone County Fire | Billings Airport Fire | 12452 | 30a4 | T |
| Yellowstone County EMS | Billings Clinic Air Operations | 12490 | 30ca | T |
Radio system sites in Yellowstone County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Yellowstone County
Common questions
What frequency does the fire department use in Yellowstone County?
Fire dispatch channels listed for Yellowstone County: Yellowstone County Fire 155.8800 MHz, narrow FM, 114.8 PL.
What frequency does EMS or the ambulance service use in Yellowstone County?
EMS dispatch channels listed for Yellowstone County: Yellowstone County EMS 155.2875 MHz, narrow FM, 127.3 PL.
Do fire departments and EMS use a trunked radio system in Yellowstone County?
Yes. Fire and EMS talkgroups are listed for Montana Public Safety Communications System: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Yellowstone County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Yellowstone County?
For Yellowstone County, start with the Pompey Pillar site of Montana Public Safety Communications System. Its control channels are 151.145, 151.2875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Yellowstone County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Yellowstone County are marked encrypted.
Are Yellowstone County fire and EMS talkgroups encrypted?
None of the 2 talkgroups listed for Yellowstone County are marked encrypted.