About Acton Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Acton: Yellowstone County Fire 155.8800 MHz, narrow FM, 114.8 PL. County-level ems dispatch that covers Acton: Yellowstone County EMS 155.2875 MHz, narrow FM, 127.3 PL. Trunked: Montana Public Safety Communications System, for example Yellowstone County Fire talkgroup 12452 (hex 30a4).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Montana Public Safety Communications System: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Acton, start with the Billings Courthouse 800 site of Montana Public Safety Communications System, about 13 miles away. Its control channels: 851.0375, 851.375 MHz.
Data updated .
Yellowstone County channels that also cover Acton
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Yellowstone County Fire | Yellowstone County Fire – Dispatch /DES | 155.8800 In 158.8650 | 114.8 PL | FMN | WPZJ876 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Yellowstone County EMS | AMR Dispatch / Careflight | 155.2875 In 150.7750 | 127.3 PL | FMN | KJW538 |
Montana Public Safety Communications System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Yellowstone County Fire | Billings Airport Fire | 12452 | 30a4 | T |
| Yellowstone County EMS | Billings Clinic Air Operations | 12490 | 30ca | T |
Nearest trunked radio sites
Distances are measured from the center of Acton.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Acton?
We do not have a fire dispatch channel listed specifically for Acton. The county-level fire dispatch channels in the same county: Yellowstone County Fire 155.8800 MHz, narrow FM, 114.8 PL.
What frequency does EMS or the ambulance service use in Acton?
We do not have a EMS dispatch channel listed specifically for Acton. The county-level EMS dispatch channels in the same county: Yellowstone County EMS 155.2875 MHz, narrow FM, 127.3 PL.
Do fire departments and EMS use a trunked radio system in Acton?
Yes. The county-level systems that cover Acton are Fire and EMS talkgroups are listed for Montana Public Safety Communications System: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Acton?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Acton?
For Acton, start with the Billings Courthouse 800 site of Montana Public Safety Communications System. Its control channels are 851.0375, 851.375 MHz. Program a control channel first; the scanner finds the voice channels from it.