Skip to content

Shepherd Fire and EMS Frequencies

Shepherd in Yellowstone County, Montana has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Billings Courthouse 800 (Montana Public Safety Communications System), about 14 miles away.

About Shepherd Fire and EMS Frequencies

Quick answer: Fire dispatch for Shepherd: Shepherd Fire 154.4450 MHz, narrow FM, no tone. County-level ems dispatch that covers Shepherd: Yellowstone County EMS 155.2875 MHz, narrow FM, 127.3 PL. Trunked: Montana Public Safety Communications System, for example Yellowstone County Fire talkgroup 12452 (hex 30a4).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Montana Public Safety Communications System: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Shepherd, start with the Billings Courthouse 800 site of Montana Public Safety Communications System, about 14 miles away. Its control channels: 851.0375, 851.375 MHz.

Data updated .

Shepherd conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Shepherd
AgencyDescriptionFrequency (MHz)ToneModeFCC
Shepherd FireShepherd Fire – Dispatch154.4450FMNWNNL893

Yellowstone County channels that also cover Shepherd

Fire Dispatch

Fire Dispatch frequencies for Yellowstone County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Yellowstone County FireYellowstone County Fire – Dispatch /DES155.8800
In 158.8650
114.8 PLFMNWPZJ876

EMS Dispatch

EMS Dispatch frequencies for Yellowstone County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Yellowstone County EMSAMR Dispatch / Careflight155.2875
In 150.7750
127.3 PLFMNKJW538

Montana Public Safety Communications System

Montana Public Safety Communications System talkgroups
AgencyDescriptionTalkgroupHexMode
Yellowstone County FireBillings Airport Fire1245230a4T
Yellowstone County EMSBillings Clinic Air Operations1249030caT

Nearest trunked radio sites

Distances are measured from the center of Shepherd.

Billings Courthouse 800 · Montana Public Safety Communications System
RFSS 2 · Site 15 (hex F) · NAC 160 · about 14 mi away
Control 851.0375, 851.375
Voice 851.75, 852.7375, 853.1375, 853.4375
Billings South 800 · Montana Public Safety Communications System
RFSS 2 · Site 41 (hex 29) · NAC 161 · about 18 mi away
Control 855.2125, 855.7125, 856.4625
Voice 856.9625, 857.4625, 857.9625
Pompey Pillar · Montana Public Safety Communications System
RFSS 2 · Site 14 (hex E) · NAC 16F · about 19 mi away
Control 151.145, 151.2875
Voice 151.4375, 154.055
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Shepherd?

Fire dispatch channels listed for Shepherd: Shepherd Fire 154.4450 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Shepherd?

We do not have a EMS dispatch channel listed specifically for Shepherd. The county-level EMS dispatch channels in the same county: Yellowstone County EMS 155.2875 MHz, narrow FM, 127.3 PL.

Do fire departments and EMS use a trunked radio system in Shepherd?

Yes. The county-level systems that cover Shepherd are Fire and EMS talkgroups are listed for Montana Public Safety Communications System: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Shepherd?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Shepherd?

For Shepherd, start with the Billings Courthouse 800 site of Montana Public Safety Communications System. Its control channels are 851.0375, 851.375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Shepherd fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Shepherd are marked encrypted.